AC300-124

AC300-124 is 50 pcs package of splice connectors capable of electrically connecting a (tap) wire to a through (run) wire and insulate the connection. Self Stripping electrical tap connectors accommodate 22-16 AWG Solid or stranded, tinned or untinned copper conductors. Recommended for use with common thermoplastic insulated wires such as: T, TF, TFF, TFN, TFFN, AWM, TEW, SAE-GPT with a maximum insulation diameter of 0.12 inches (3,0 mm). Maximum recommended current for general purpose applications: 22 AWG - 3 AMPS, 20 AWG - 4 AMPS, 18 AWG - 7 AMPS, 16 AWG - 10 AMPS.

AC300-125

AC300-125 is 50 pcs package of twist lock splice connectors. Connector is designed to accommodate 14-22 AWG wire, providing safe and secure connection. Tough thermoplastic shell provides superior protection against environmental extremes. Fixed square-wire spring construction provides a secure connection that will not relax over time. Connector features a threaded funnel entry to guide wires into the connector. Deep gripping ribs and swept-back wings permit a higher torque.

CB470-112 & CB470-114

The CB470-112 and CB470-114 are packages of Crimp-type quick VGA Male assembly shells. Each set includes 1ea top shell cover, 1ea bottom shelf cover, 1ea 15pin HD male connector housing, 2ea connector thumbscrews, 2ea retaining rings for thumbscrews, 5ea pre-crimped terminal ground wires, 10ea crimp terminal and 1ea black plastic nut. The products are designed to make easy VGA termination in the field. Crimp Red, Green, Blue H and V wires, fold the ground shield back and install the special shell with a twist on adapter and the job is done.

For proper installation, use Crimp Tool model CB470-701.

CB470-112: 50sets/pack

CB470-114: 100sets/pack

CT8206AC

The CT8206AC BNC Crimp Connector is designed for use with bulk CB4200MR Series cables. Using a 4-part design, the CT8206AC provides a high quality Male BNC termination for the coaxial channels used in these cables. The CT8206AC comes in a package quantity of 100 pieces. For proper installation, use Crimp Tool CT8207AC.

CT8211AC

The CT8211AC BNC Crimp Connector is designed for use with bulk CB4300MR and CB4400MR Series’ cables. Using a 3-part design, the CT8211AC provides a high quality Male BNC termination for the coaxial channels used in these cables. The CT8211AC comes in a package quantity of 100 pieces. For proper installation, use Crimp Tool CT8212AC.

MS8139MG

The MS8139MG is a ten-pack (10) of Female-to-Female BNC Barrels used to bridge together two coaxial cables terminated on Male BNC connectors.

MS8148MG

The MS8148MG is a BNC Male-to-RCA Female adapter that is commonly used for many video applications.