ALTINEX, Inc |

DA1906SX

1-In 3-Out VGA Distribution Amplifier

Three individually buffered outputs
3' VGA male-to-male input cable included
Ultra compact design
Solid metal enclosure
External power supply included (9V 500mA)
Includes: (1) power adapter, 3 ft/0.9m male-to-male VGA cable

The DA1906SX is a 1-In 3-Out VGA (VGA thru UXGA) distribution amplifier designed to allow the connection of a single computer source to as many as three monitors or projectors. Offering a bandwidth of 350 MHz, the DA1906SX can pass both standard and super high-resolution VGA-type signals without degradation. The DA1906SX can drive a signal up to 100 feet or more using high quality VGA cable. Multiple DA1906SX units can also be daisy-chained together for even longer runs.

The DA1906SX is packaged with a three foot Male to Male VGA cable for connection to the output of a computer. Longer cables are optionally available for this purpose, if desired. A termination switch on the input of the DA1906SX also allows it to be used with a VGA "Y" type cable on the input instead of the 3 foot direct cable. The VGA "Y" cable provides a means of feeding a local monitor. This is not recommended if the application involves ultra high-resolution signals.

The DA1906SX is extremely compact and can be mounted to furniture or other surfaces using optional hardware.

Specifications

General	Electrical
Input: 15-pin HD Female	Input Video Signal
Outputs: (3) 15-pin HD Female	Analog: -1.5V to 1.5V (1.5V p-p max.)
Compatibility	Impedance: 75 ohms
VGA, thru UXGA. May also be used to pass high resolution RGBHV, RGBS, RGsB, and RsGsBs format signals (may require connector adaptation).	Input Sync Signal
	Horiz., Vert. & C-Sync: TTL (+/-)
	Sync on Green: -0.3 V
	Impedance: 10k ohms
	Output Video Signal
	Analog: Gain of 1.05 (+/-5%)
	Fall/Rise Time: 1.4 ns
	Impedance: 75 ohms
	Output Sync Signal
	Horiz., Vert. & C-Sync: TTL (+/-)
	Sync on Green: -0.3 V
	Impedance: 22 ohms
	Frequency Compatibility
	Horizontal: 15 to 200 kHz
	Vertical: 47 to 180 Hz
	Bandwidth: 350 MHz @ -3dB
	Coupling: DC
	Cross-talk: -40dB @ 10 MHz
	Power: 9V to 500mA external adapter (incl.)
	Power Consumption: 4 watts Max.

Mechanical	Optional Accessories
Width: 4.50 in; 114 mm	MB1001: "L" Shaped Brackets
Height: 3.00 in; 76 mm
Depth: 1.00 in; 25 mm
Weight: 0.4 lb.; 0.18 kg
Ship Weight: 2.4 lb.; 1.09 kg
Material: 0.1" Al
Finish: Gray
Top panel: Lexan
T° Operating: 10°C to 35°C
T° Maximum: 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs

Application Diagram

Specifications/Diagrams subject to change without notice.