Specially engineered for use with ALTINEX products such as the TM1278 or Designer Solutions - PNP/TNP/CNK line of tabletop interconnect products. The VA6804SX remotes horizontal positioning control and signal present LED away from the interface, enabling integration into an input plate through the use of an optional accessory (part# CM11365 ). This allows the VA6804SX to be out of sight while still providing access to its controls.

Note that for the PNP & TNP series of products, the CM11365 may require custom installation before leaving the factory; please speak with an ALTINEX representative about customization options.

A continuous, single-dial RGB equalization control simultaneously boosts the Red, Green, and Blue video components allowing the VA6804SX to compensate for losses over long runs. Using super high-resolution coaxial cable, it can equalize cable lengths up to 200ft.

This interface offers a 15-pin HD input and an independently buffered 15-pin HD local monitor output. The default output of the VA6804SX is RGBHV on (5) BNC connectors. Alternatively, the VA6804SX can be set to output RGBS or RGsB format signals by changing internal jumper setting – the VA6804SX does not strip sync from green; if the incoming signal is RGsB, the output must also be RGsB. The VA6804SX converts incoming unbalanced audio to balanced and buffered outgoing audio.

The VA6804SX comes with mounting brackets (MB1001) included. Streamlined, it’s ideal for mounting under a table or to other surfaces. With integrated 3.5mm stereo audio jacks and 15-pin HD male connectors on both ends, the CB9100AV line of interface cables offers a high-quality, convenient connection between the VA6804SX input and the audio and video outputs of a computer. These interface cables for the VA6804SX must be ordered separately. See Interface Accessories below for more information.