CN5102US

This dual AC power insert plate comes with an attached six-foot cord terminated with a male plug, and provides two standard AC power receptacles for usage in the U.S., Canada and Mexico. Covers 5 screw hole sets.

CN5110RB

These brackets can be added to the Cable-Nook Jr., and adjusted to "catch" cable ends of varying widths. The shelf itself can be adjusted to different depths inside the box. Comes with five brackets and ten retaining screws. Each bracket covers approximately 1 ½ screw hole sets.

CNK-IP-105

Insert plate with (2) empty ports for Snap-In connectors. See Snap-In Connectors below for list of available connectors. Covers 5 screw hole sets. See Snap-in Connectors for an entire list of available connectors.

CNK-IP-106

Insert plate with (4) empty ports for Snap-In connectors. See Snap-In Connectors below for list of available connectors. Covers 8 screw hole sets. Snap-in Connectors for an entire list of available connectors.

CNK-IP-107

Insert plate with (1) 15-Pin HD female passive pass-through connector and (2) empty Snap-In ports. See Snap-In Connectors below for list of available connectors. Covers 8 screw hole sets. Snap-in Connectors for an entire list of available connectors.

CNK-IP-108

Insert plate with (1) empty port for D-sub connectors. Also accepts 15-pin D-sub connector. Covers 5 screw hole sets. Snap-in Connectors for an entire list of available connectors.

CNK-IP-109

Insert plate with 15-Pin HD female passive pass-through connector. Female 15-pin HD connector on back side. Covers 5 screw hole sets. Snap-in Connectors for an entire list of available connectors.

Snap-In Connectors

A variety of common audio, video, and data connectors are available for custom configuration of the Cable-Nook Jr. Use with an insert plate with Snap-In ports (CNK-IP-105, CNK-IP-106, CNK-IP-107). Snap-In Connectors.