DS901-120

The DS901-120 comes pre-configured with 2 power receptacles, 1 VGA connector, 2 RJ-45 (UTP) connectors, 1 RJ-11 (Modem) connector, and 1 3.5mm audio connector. All connectors including the power receptacles come with 6’ cable and are fully terminated.

4 slots required

DS901-121

Each DS901-121 comes pre-configured with 2 power receptacles and 4 empty openings that can be custom-configured to accept various connectors. For example: RJ-45 (UTP) connectors, an RJ-11 (Modem) connector, a 3.5mm Audio connector, and 4 Snap-in- connectors. All connectors including the power receptacles come with 6’/1.8m cable and are fully terminated.

4 slots required

SP3212AV

Sectional plate comes with two empty ports for D-sub connectors, two for 3.5mm audio connectors and four for snap-in connectors.

3 slots required

SP3201AV

Sectional plate comes with a 15pin HD female-to-male 6' (1.8m) cable and a 3.5mm stereo female-to-male 6' (1.8m) cable.

1 slot required

SP3202AV

Sectional plate takes up one slot, includes a 15pin HD female-to-female gender changer and a 3.5mm stereo female jack-to-terminal block connector.

1 slot required

SP3203AV

Sectional plate offers three RCA female jacks (yellow, red, and black), a 6' (1.8m) cable, and takes one slot.

1 slot required

SP3204AV

Sectional plate takes up one slot, comes with a 4pin mini-Din, RCA female and 3.5mm stereo female jacks with solder pins and a 6' (1.8m) cable.

1 slot required

SP3205AV

Sectional I/O plate with cable DVI sectional plate with female connector includes 6' (1.8m) cable terminated in a male DVI connector.

1 slot required

SP3206AV

Sectional plate provides a female 9pin D-subconnector, a 6' (1.8m) cable terminated in a male 9pin D-subconnector and takes one slot.

1 slot required

SP3207AV

Sectional plate provides a RS-232 DB9 female connector and a push-button momentary contact closure, both with 6' (1.8m) cable. The RS-232 connector is terminated in a male 9pin D-sub connector; the contact closure is not terminated, and uses four wires – two Sfor the contact, two for an integrated green LED.

1 slot required

SP3208AV

Sectional plate provides a RS-232 DB9 female connector and a push-button momentary contact closure, both with 6' (1.8m) cable. The RS-232 connector is terminated in a male 9pin D-sub connector; the contact closure is not terminated, and uses four wires – two for the contact, two for an integrated green LED.

1 slot required

SP3209AV

Sectional plate provides a RS-232 DB9 female connector and a push-button latching contact closure, both with 6' (1.8m) cables. The RS-232 connector is terminated in a male 9pin D-subconnector. The contact closure is not terminated and uses four wires: two for the contact and two for an integrated green LED. This sectional plate takes one slot.

1 slot required

Empty Snap-in Port Sectional Plates

Empty snap-in port sectional plates take up one slot and have two empty snap-in ports the user can custom-configure.

See Snap-in-Connectors for available options.

SP3102EP: Dual empty Keystone snap-in port
SP3103EP: Dual empty Ortronics®-only snap-in port*
SP3104EP: Empty 1 standard + 1 UK Telephone snap-in port

1 slot required

*Ortronics is a registered trademark of Ortonics, Inc. in the United States and other countries. The product from Ortronics is not affiliated with Altinex, Inc.

Blank Sectional Plates

Blank sectional cover plates are offered in many different sizes. The 1-slot plate covers two screw-holes; the 2-slot plate covers four screw-holes, and so forth.

SP1001BL: 1 slot required
SP1002BL: 2 slots required
SP1003BL: 3 slots required
SP1004BL: 4 slots required