|
The TM1278 products are multimedia input plates designed for mounting against a surface, usually under a table or inside a podium. The front of the TM1278 offers the following pass-through connectors: 1 standard AC receptacle with a IEC-320 type jack on the backside, 1 VGA Computer Video (15pin HD F/M) connector with 12 inch cable, 1 Computer/MP3 Audio (3.5mm F), 1 Composite Video BNC F, 2 Left/Right Audio RCA F, 1 Telephone (RJ11) and 1 Network (RJ45 F) snap-in connector. In many applications the TM1278 may be used together with other ALTINEX solutions. For example, the VA6804SX can be mounted behind the TM1278, with the computer video and audio channels connected.
The Edge series from ALTINEX offer a wide variety of options for routing computer audiovisual signals, network connections, and AC power in a cost-effective way. The Edge is easily installed under a table or inside a lectern. It can also be mounted on a side of a lectern or a table leg. For a simple and cost effective installation, The Edge provides unparalleled ease of use and flexibility.
In the past the only way to provide AV connectivity at a conference table or a lectern was to cut the table for wires feed through or to have wires laying on the ground. With the introduction of The Edge, there is now another choice: route cable under table and bring your connectors to the edge of the table. Now in one convenient location, between chairs, users have an easy access to power, network and AV connectors.
|
Specifications
