ALTINEX, Inc | Discontinued Products

*** RETIRED ***

DA1001DV

1-In 2-Out DVI + Audio Distribution Amplifier

Accepts single DVI-D + Audio Input
Provides two DVI-D + Audio Outputs
VGA thru SXGA (UXGA at 60 Hz refresh)
Drives each output up to approx. 12 feet
Unbalanced audio input, balanced audio output
External 9V power adapter included
Includes: (1) power adapter

User Guide

Printable Version

Designed to handle the new DVI (Digital Visual Interface) digital computer video standard, the DA1001DV accepts a single DVI-D (digital only) input and provides two simultaneous DVI-D outputs. The DVI standard is becoming quite common on many digital flat panel displays and projection systems and provides superior image quality because it eliminates the typical signal degradation caused by digital to analog and analog to digital conversion.

The DA1001DV offers a "single link," making it compatible with VGA thru SXGA signal resolutions and UXGA at 60 Hz refresh rate. The DVI standard presents a cable length limitation of approximately 12 feet. Although each output of the DA1001DV is buffered, this distance limitation still applies on the output. The total system length (including the input cable) is limited to approximately 25 feet.

In addition to passing DVI-D type signals, the DA1001DV also passes stereo audio signals, providing a 3.5mm stereo mini input jack, a 3.5mm local monitor jack, and a balanced stereo audio output on a 5 pin terminal block.

To connect the DA1001DV to the computer and displays, ALTINEX offers both male to male DVI-D cables and DVI-D + Audio Cables in lengths of 3, 6 and 12 feet.

Specifications

General	Electrical
Input	Input Video Signal
Computer Video: Female DVI-D	Digital: 1.2V p-p Max
Audio: Female Stereo Mini (3.5mm)	Impedance: 100 ohms
Outputs	Output Video Signal
Local (Computer Video): Female DVI-D	Digital: 0.6V p-p nominal
Local (Audio): Female Stereo Mini (3.5mm)	Impedance: 100 ohms
Main (Computer Video): Female DVI-D	Audio Input
Main (Audio): 5-pin Terminal Block	Type: Unbalanced, <1V p-p
Compatibility: DVI-D Single Link (VGA thru SXGA, UXGA at 60Hz) Unbalanced stereo audio input, balanced stereo audio main output	CMMR: >80 dB @ 10Hz to 20kHz
	Impedance: 10k ohms
	Audio Output
	Type: Unbalanced Local, Balanced Main
	Impedance: 600 ohms
	Crosstalk: <80 dB @ 1kHz
	Signal-to-Noise Ratio: >95 dB
	Bandwidth: 10 Hz to 40kHz
	Stereo Channel Separation: >75dB @ 1kHz, >60 dB @ 20 kHz
	Power: External Power Adapter, 9V 500mA (included)

Mechanical	Optional Accessories
Width: 4.60 in; 116.84 mm	MB1001: Two L-shaped mini brackets
Height: 3.55 in; 90.10 mm
Depth: 1.50 in; 38.10 mm
Weight: 0.6 lb.; 0.3 kg
Ship Weight: 2.6 lb.; 1.2 kg
Material: 0.1" Al
Finish: ALTINEX Grey
Top Panel: Lexan Overlay
T° Operating: 10°C to 35°C
T° Maximum: 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs.