ALTINEX, Inc | Discontinued Products

*** RETIRED ***

DA1322AT

1-In 2-Out RGBHV Distribution Amplifier with EQ & Gain

350 MHz Bandwidth
Two Individually Buffered Outputs
Gain & Equalization DIP Switches for RGB
AC or DC Video Coupling
Sync Channels Can Be Set to Analog (Pass-through) or Digital (Regenerated TTL)
Sync/Video Channel Termination Switches
Solid Metal Enclosure
1-U High, 1/2 Rack Wide
Rack-mountable with optional hardware
Internal Power Supply (95-240V)

User Guide

Printable Version

The DA1322AT is a 1-In 2-Out RGBHV high resolution video distribution amplifier designed to allow the connection of a single computer video or interface source to one or two monitors or projectors capable of handling the source resolution.

While similar to the DA1222AT, the DA1322AT offers additional features for the advanced user. Each video channel offers DIP switches for gain and equalization adjustments that can be used when driving signals over long cable runs. The video channels can also be set to either AC coupling or DC coupling. Each video channel can also be terminated or unterminated.

The sync channels on the DA1322AT can be set to pass either analog video/sync or they can be set to regenerate digital (TTL) sync. In addition, the DA1322AT is capable of outputting Horizontal and Vertical Sync, Composite Sync, or Sync on Green. Finally, the sync channels on the DA1322AT can be terminated or unterminated.

Though primarily designed to pass an RGBHV signal format, the DA1322AT can also pass RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-video (Y/C), and Composite Video by using the appropriate channels.

The DA1322AT utilizes a universal linear power supply with continuous operation between 95-240V AC.

Specifications

General	Electrical
Input: 5-Female BNC Connectors	Input Video Signal
Output: (2) 5-Female BNC Connectors	Analog: -1.5V to 1.5V (1.5V p-p max)
Compatibility: High Resolution RGBHV, RGBS, RGsB, and RsGsBs format computer video. Component (Y,R-Y,B-Y), S-video (Y/C), and Composite Video (NTSC, PAL, SECAM). Video sources may be passed through the Red, Green, and Blue channels. Video may also be passed through the Horizontal Sync and/or Vertical Sync channels when DIP switches are set in the proper position.	Impedance: 10k ohms/75 ohms selectable
	Input Sync Signal
	Horizontal, Vertical, and Composite Sync: 0.5V-5V
	Sync on Green: -0.3V (on video channels)
	Impedance: 10 kOhm/75 ohm selectable
	Output Video Signal
	Analog: Gain of 1.05 (+/-5%) or 1.35 (+/-5%)
	Fall/Rise Time: 1.0 ns
	Impedance: 75 ohms
	Output Sync Signal
	Composite Sync: Analog/TTL (+/-) Selectable
	Sync on Green: -0.3V (on video channels)
	Impedance: 22 ohms
	Frequency Compatibility
	Horizontal: 15-200 kHz
	Vertical: 47-180 Hz
	Minimum Video Bandwidth: 350 MHz @ -3dB
	Typical Video Bandwidth: 500 MHz @ -3dB
	Cable Equalization: Selectable: 0dB @ 100 MHz (off); 4.5dB @ 100 MHz (on)
	Cross-talk: -40dB @ 10 MHz
	Coupling: DC
	Power: 95-240V continuous
	Power Consumption: 10 watts max

Mechanical
Width: 8.50 in. (216 mm)
Height: 1.75 in (44 mm)
Depth: 4.50 in (114 mm)
Weight: 2.0 lb (0.91 kg)
Ship Weight: 3.2 lb (1.45 kg)
Material: 0.1" Al
Finish: Gray
Front/Back Panels: Lexan
Temperature (Operating): 10C-35C
Temperature (Maximum): 50C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hours