ALTINEX, Inc | Discontinued Products

*** RETIRED ***

DA2000TM

Table Mount Computer Video + Audio Line Driver

Mounts easily to table bottom
VGA-type input on 15-pin HD connector
Stereo audio input on 3.5mm mini jack
Buffered RGBHV output on terminal block
Operates on low voltage power (9V DC)
Super compact metal enclosure
Unit ships with Power Supply "PS5502US"

User Guide

Printable Version

The DA2000TM is a computer video + stereo audio line driver designed for mounting under a table or to other surfaces in tight spots. Its extremely compact form promotes inconspicuous attachment, yet still allows for active components necessary to drive high-resolution computer signals a distance of up to 100 feet or more.

The DA2000TM offers a female VGA-type 15-pin HD input connector and a stereo audio mini jack on its front panel. The rear panel offers three terminal block connectors for the connection of RGBHV, balanced stereo audio and low voltage power (9V DC). This unit is compatible with VGA, SVGA, XGA, SXGA, UXGA, and QXGA signal formats.

The DA2000TM provides fully buffered, amplified outputs. Also, the DA2000TM converts an incoming unbalanced stereo audio signal to balanced stereo audio on the output.

ALTINEX offers optional adhesive AV label sheets, allowing the inputs to be labeled as needed. The input cable must be ordered separately.

Specifications

General	Electrical
Input	Input Video Signal
Computer Video: Female 15-pin HD, VGA compatible pin-out	Analog: 1.5V Max.
Audio: Female 3.5mm Stereo Mini	Impedance: 75 ohms +/- 1% (Terminated)
Output	Input Sync Signal
Computer Video: 10-pin Terminal Block (RGBHV & GNDs)	Horizontal, Vertical: TTL (+/-)
Audio: 5-pin Terminal Block (L+, L-, GND, R+, R-)	Impedance : 10k ohms
Compatibility: VGA thru QXGA with Stereo Audio	Output Video Signal
	Analog: 1.5V p-p Max (Terminated)
	Impedance: 75 ohms
	Equalization: Optimized for 75 ft., high res. coax
	Output Sync Signal
	Horizontal, Vertical: TTL (+/-)
	Impedance : 22 ohms
	Frequency Compatibility
	Horizontal: 15-130 kHz
	Vertical: 25-180 Hz
	Bandwidth: -3dB @ 350 MHz
	Audio Input
	Impedance :10k ohms
	Max Level: 0 dBu
	Audio Throughput
	Gain: +6 dB balanced, 0 dB unbalanced
	Frequency Response: 10 Hz to 20 kHz (+/- 0.05 dB)
	Noise Floor: -98 dB @ 20 kHz
	CMRR: <40 dB, 10 Hz to 20 kHz
	Power: 9VDC to 500mA
	Power Consumption: 1.0 watts max.
	Power Connector: 2 pin terminal block (back panel)

Mechanical	Optional Accessories
Width: 1.5 in; 39 mm	PS5503US: 9V-500mA U.S. Power Adapter with 50 ft. cable
Height: 4.1 in; 105 mm	PS5581SM: Rack-mount Power Supply
Depth: 2.1 in; 54 mm	MS8301LB: Input/output label sheet (White text on black)
Weight: 1.0 lb.; 0.45 kg	CB9103AV: VGA + Stereo Audio Input Cable, 3 ft
Ship Weight: 1.6 lb.; 0.73 kg	CB9106AV: VGA + Stereo Audio Input Cable, 6 ft
Material: Steel	CB9112AV: VGA + Stereo Audio Input Cable, 12 ft
Finish: Black
T° Operating: 10°C to 35°C
T° Storage: 10°C to 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs

Application Diagram

Specifications subject to change without notice. Do not use the diagram above to perform table/wall modification.