*** RETIRED ***

DA3000TM

Table Mount Video + Audio Line Driver

  • Mounts easily to table bottom
  • Video & stereo audio input (3-RCA connectors)
  • Buffered video & audio outputs on back panel
  • Operates on low voltage power
  • Super compact all metal enclosure
  • No power adapter Included

Want to tell us what you think?
Feel free to post your comments here:
(Please include your email address if you
would like us to respond.)

The DA3000TM is a composite video + stereo audio line driver designed for mounting under a table or to other surfaces in tight spots. Its extremely compact form promotes inconspicuous attachment, yet still allows for active components necessary to drive signals over long cable runs.

This unit offers three female RCA type connectors on its front panel. The yellow RCA passes composite video signals; the red and white RCA’s pass right and left stereo audio respectively. The rear panel offers three terminal block connectors for the connection of video, balanced stereo audio and low voltage power (9V DC).

The DA3000TM is capable of accepting composite video signals in standard NTSC, PAL or SECAM formats. The output is fully buffered and amplified. Also, the DA3000TM converts an incoming unbalanced stereo audio signal to balanced stereo audio on the output.

ALTINEX offers optional adhesive A/V label sheets, allowing the inputs to be labeled as needed. All accessories, including the power adapter, must be ordered separately.

Specifications

General

Electrical

Input

Input Video Signal

Video: Female RCA (Yellow)

Analog: 1.5V Max.

Audio: (2) Female RCAs (Red, White)

Impedance: 75 ohms +/- 1% (Terminated)

Output

Output Video Signal

Video: 2-pin Terminal Block

Analog: 1.5V p-p Max (Terminated)

Audio: 5-pin Terminal Block (L+, L-, GND, R+, R-)

Impedance: 75 ohms

Compatibility

Audio Input

Composite Video: (NTSC, PAL, SECAM) and Stereo Audio

Impedance: 10k ohms

 

Max Level: 0 dBu

 

Audio Throughput

 

Gain: +6 dB balanced, 0 dB unbalanced

 

Frequency Response: 10 Hz to 20 kHz (+/- 0.05 dB)

 

Noise Floor: -98 dB @ 20 kHz

 

CMRR: <40 dB, 10 Hz to 20 kHz

Power: 9VDC to 500Ma

 

Power Consumption: 1.0-watt max.

 

Power Connector: 2 pin terminal block

 

 

Mechanical

Optional Accessories

Width: 1.5 in; 39 mm

PS5503US: 9V to 500mA U.S. Power Adapter with 50 ft cable

Height: 4.1 in; 105 mm

PS5581SM: Rack-mount Power Supply

Depth: 2.1 in; 54 mm

MS8301LB: Input/output label sheet (white text on black)

Weight: 1.0 lb.; 0.45 kg

 

Ship Weight: 1.6 lb.; 0.73 kg

 

Material: Steel

 

Finish: Black

 

T° Operating: 10°C to 35°C

 

T° Storage: 10°C to 50°C

 

Humidity: 90% non-condensing

 

MTBF (calc.): 40,000 hrs

 

 

 

Copyright © 2008 ALTINEX, Inc. All rights reserved. | v5.1 | 1.800.ALTINEX | Terms of Use | Terms & Conditions | Privacy