ALTINEX, Inc | Discontinued Products

*** RETIRED ***

DAV0106-V1A2

1-In 6-Out Video + Stereo Audio Distribution Amplifier

Composite video (NTSC, PAL, SECAM)
GLI on-board™
Stereo or mono audio (balanced or unbalanced)
Loop-able video & audio inputs (with terminal switches)
Individually isolated and amplified outputs

User Guide

Printable Version

The DAV0106-V1A2 is a 1-In 6-Out composite video and stereo audio distribution amplifier. This product allows the connection of a single video + audio source to as many as six display or recording devices. All video connections are made on female BNC connectors; all audio connections are made on 5-pin terminal block connectors.

The video and audio inputs are loop-able, allowing easy expansion by adding additional distribution amplifiers. The video input offers a loop output with a 75-ohm termination switch. The audio input offers a 600 ohm/Hi-Z termination switch.

The DAV0106-V1A2 offers built-in ground loop isolation (GLI on-board) to help prevent hum bars and other artifacts caused by ground loops in a system.

Each video and audio output is isolated and amplified. The video channels are compatible with NTSC, PAL, and SECAM. The audio channels can pass balanced or unbalanced signals. If the input is unbalanced, any of the outputs can be unbalanced or balanced.

The DAV0106-V1A2 is rack-mountable in a 1U high, 1/2-rack space using optional hardware.

Specifications

General	Electrical
Input	Input Video Signal
Video: (1) Female BNC	Analog: 1.7V Max
Audio: (1) 5-pin Terminal Block: L+, L-, GND, R+, R-	Impedance: 75 ohms +/- 1% (Terminated) or 10k ohms (Unterminated)
Outputs	Isolation: Differential, Rejects Common Mode 50/60 Hz
Video (Loop): (1) Female BNC (unbuffered)	Output Video Signal
Video (Main): (6) Female BNC	Analog: 1.7V p-p Max (Terminated)
Audio: (6) 5-pin Terminal Blocks: L+, L-, GND, R+, R-	Impedance: 75 ohms +/- 1%
Compatibility: Composite Video (NTSC, PAL, SECAM); Balanced or Unbalanced Stereo or Mono Audio	Gain: 0 dB
	Frequency Response
	Bandwidth: 85 MHz @ -3dB
	Flatness: 0.1 dB to 30 MHz
	Audio Input
	Impedance: 600 ohms (Terminated), 10k ohms (Unterminated), Balanced or Unbalanced
	Level: 20 dBu Balanced or Unbalanced
	Audio Throughput
	Gain: +6 dB balanced, 0 dB unbalanced
	Frequency Response: 10 Hz to 20 kHz (+/- 0.05dB)
	Noise Floor: -100 dB @ 20 kHz
	Stereo Channel Separation: >100 dB @20 kHz
	CMRR: >80 dB, 10 Hz to 20 kHz
	Audio Output
	Impedance: 50 ohms unbalanced, 100 ohms balanced
	Drive (with Hi-Z Input): > 20 dBu, balanced or unbalanced
	Drive (with 600 Ohm Input): >10 dBu, balanced or unbalanced
	Power: 90-240V Continuous
	Power Consumption: 10 watts max.

Mechanical	Optional Accessories
Width: 8.5 in; 216 mm	DA1294FC: Rack ears for single unit
Height: 1.75 in; 44 mm	DA1293FC: Rack shelf for two units side-by-side
Depth: 4.73 in; 121 mm	TM1271: Table Mount Bracket
Weight: 2.0 lb.; 0.91 kg
Ship Weight: 3.2 lb.; 1.45 kg
Material: 0.1" Al
Finish: ALTINEX Grey
Front/Back Panels: Lexan Overlay
T° Operating: 10°C to 50°C
T° Maximum: 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs