ALTINEX, Inc | Matrix Switchers

VM2143VS

8-In Video/Sync Input Card

The VM2143VS is an 8-In Video Input Card and can handle a wide array of signal formats. The VM2143VS can be used for video signals including composite video, S-Video, component video, RGsB, RGBS and RGBHV. Easily accessible jumpers allow the user to select AC or DC couplings, as well as, high or low input impedance for each of the 8 individual inputs.

This 8-Input video card provides built-in ground loop isolation (GLI) using differential inputs. This is an extremely important feature because it protects against hum bars and other interference caused by ground loops, which wreak havoc on large-scale matrix systems. The VM2143VS input card and the CM2144VS its output counterpart provide a wide bandwidth allowing them to pass extremely high-resolution computer video signals without signal degradation.

Specifications

general	ELECTRICAL
Inputs	Video Input Signals (jumpered for video)
Video/Sync: (8) BNC female	Analog Level: 1.5Vp-p max.
Outputs	Analog Impedance: 75ohms
Video/Sync: edge Connector	Gain: 0dB +/- 0.5dB
Configuration Settings	Sync Input Signals (jumpered for sync)
Input Coupling: (16) Jumpers	Sync Levels: TTL (+/-)
Output Impedance: (8) Jumpers	Sync Impedance: 2kohms
Compatibilty	Power Consumption (from enclosure)
Signal Types: RGB, RGsB, RGBS, RGBHV, S-Video, YPbPr, Composite Video (NTSC, PAL, SECAM, etc.)	+6V: 600mA (3.0W)
Video Resolutions	-6V: 350mA (1.8W)
VGA through UXGA, 480p through 1080i	Total Power: 4.8W max.
mechanical	ACCESSORIES
Enclosure Slots: One
Weight: 0.38lb (0.17kg)
T° Operating: 10°C to 35°C
T° Maximum: 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs (min.)

Specifications/Diagrams subject to change without notice.