|
The MT103-111, MT103-100, and MT103-105 are 1-In, 6-Out Video Distribution Amplifier cards designed for use in MultiTaskers ®. When installed in a MultiTasker, these MT Video DA cards enable the connection of a single composite video source to six displays or recording devices. For more outputs, the MT103-100 and MT103-111 can be used with one or more Video DA expansion cards. See the MT103-101, MT103- 106, MT103-112 for more information.
A variety of video signal formats can be accommodated using multiple MT Video DA cards in a MultiTasker. For example, two MT Video DA cards can handle the two components of an S-Video signal (chroma and luma). Create a component video distribution amplifier by installing three of the MT Video DA cards, one each for the Y, Pr, and Pb (or Y, R-Y, B-Y) signal components. Similarly, the MT Video DA series cards can also be used to pass computer video signals: 4 cards for RGBS and 5 for RGBHV.
All of the cards in the MT Video DA series provide GLI onBoard ground loop isolation. This provides protection against hum bars, artifacts, and potential equipment damage caused by ground loops that are often present in audiovisual presentation systems.
Look to the MT103-100 or MT103-111 for high-bandwidth performance and expansion capabilities. Each card offers industry leading 425 MHz bandwidth, with the MT103-100 adding “on/off control” of each output. Many combinations of “always on” and “on/off controlled” outputs – up to 38 total - can be achieved by adding up to four Expansion cards to the MT103-100 or MT103-111.
For the most economical configurations, the MT103-105 is a low cost solution for “always on,” non-expandable distribution, and solid 325 MHz bandwidth performance.
|
Specifications