|
The MT105-103 and MT105-102 are 8-In, 8-Out Video Matrix Switcher cards designed for use with a MultiTasker. When installed in the enclosure (MT100-100), these cards enable 8 composite video sources to be connected and switched to 8 different display or recording devices. Multiple MT105-103 and MT105-102 cards can be installed in the enclosure to provide additional functionality. For example, two cards can be used to handle the two components of an S-Video signal (chroma and luma), three cards to handle Component Video, and five cards to handle RGBHV.
The MT105-103 provides an economical application that does not involve the use of extremely high-resolution computer video signals. This card is designed for 325 MHz bandwidth performance.
The MT105-102 uses solid state switching technology and offers a video bandwidth of 450 MHz, enabling it to pass high-resolution video signals without degradation. Each input has ground loop isolation (GLI) to eliminate hum bars cause by ground loops that are often seen in large-scale systems.
Inputs are selected through easy-to-use ASCII commands from a control system or computer connected to the RS-232 port of the MultiTasker enclosure.
|
Specifications