ALTINEX, Inc | MultiTasker

MT107-201

8 BNC inputs + GLI 300MHz

Use with MT107-100 Matrix Engine ™
Signal detect
GLI
Receives video and/or sync signals
Up to 7 cards attach to Engine

	User Guide	Design Guide
	Printable Version

The MT107-201 is an 8 BNC Input Expansion card for use with the MT107-100 64X64 Matrix Engine and is capable of receiving video and/or sync signals. Each MT107-201 connects to an input connector on the MT107-100 Matrix Engine. Up to 7 MT107-201 cards may be connected to the Engine via special high bandwidth video cables.

As part of the MT107-100 Matrix Engine, the MT107-201 has special built-in features, such as signal detection circuitry which determines the presence of an input signal on any channel.

Video input signals are buffered to the matrix system through individual Ground Loop Isolation amplifiers. The video amplifier can be used for either video or sync signals.

ALTINEX software and hardware allow for the switching of any input to output combination and prevents illegal switching combinations that may damage components.

Specifications

General	Electrical
Inputs: 8	Video Input Signals: R,G,B
Input Connectors: 8 BNC Female	Impedance Analog: 75 Ohms
Compatibility	Analog Signal Level: 1.5V p-p max.
Signal types: RGBHV, RGBS, RGsB,Composite Video, Sync	Sync Input Signals: H,V
Signal resolution: VGA through UXGA	Signal Level: 3 - 5 Volts TTL
	Bandwidth
	Bandwidth: 300 MHz @ -3dB

Mechanical
Enclosure Slots Required: 1 Slot per Card
Weight: 0.4 lb (0.2 kg)
Connector Panel: Black Anodized
T° Operating: 10°C-50°C
T° Maximum: 75°C
Humidity: 90% non-condensing
MTBF (calc.): 38,000 hrs.

Application Diagram

Specifications/Diagrams subject to change without notice.