|
The MT112-102 has twelve relays, each capable of passing as much as 1 amp at up to 48 volts. The loads should be resistive only. These relays are not designed to drive motors or any type of inductive or capacitive load.
The 12 relays allow on-off control of external devices such as projectors or lights, or the raising and lowering of projector screens.
Each of the 12 relays is independently controlled through either the front panel, RS-232 bus commands or both. Although independently controlled, the front panel and RS-232 commands may be configured to switch multiple relays on or off with a single key or command.
|
Specifications