Altinex provides all of the necessary information for accurate table cutout for Altinex table top units. This video shows a step by step instruction on how to make table cutout using provided template. Although all of Altinex products provide .25" bezel lip to cover cutout variation, we still recommend to use a template for all cutouts in the field. The templates can be downloaded from our web site and should be printed to 1:1 scale. Special ruler markings are provided on all templates to assure accurate dimensions before cutting the table.
TNP155 Snap-In Connectors Replacement
All table top units are assembled in our facility in Brea, Ca. In some cases customers asked us if snap-ins on the TNP155 unit can be replaced in the field. A general answer is: NO. The TNP155 unit is UL rated and to replace the snap in connectors, you need to open high voltage portion of the table top unit. The video shows how to do it, but we still recommend that you send you unit back to Altinex for replacement in the factory.
TNP530 Installation with Cable Retractors
The TNP530 is a compact interconnect solution designed for mounting into tables, podiums, or other furniture as part of a presentation system. Inputs are accessed by pushing down on the top cover allowing TNP530 to “tilt” open. The inputs are hidden by pressing down on the top cover until the latching mechanism engages. In the closed position, the top cover lays almost flush with the tabletop. The TNP530 is a “hybrid package” that covers the needs of many users and includes the following connectivity: 2pc – U.S. power receptacles (12 Amps) 1pc – Digital video –HDMI retract (RT300-125) 1pc – Computer video (15-pin HD)- VGA retract (RT300-121) 1pc – Audio (3.5mm) (CM11316) 1pc – Network (RJ-45), (CM11351) 2pc- USB (Type A) (CM11369) All connectors are passive and have 6 ft (2m) have cables that pass through to the bottom of unit. HDMI and VGA retracts offers 4 ft of retract cable and 4 ft fixed under table cable.
Infocomm 2015 rAVe interview TNP530
During Infocomm 2015 we introduced a new product, TNP530. The TNP530 is a pre-configured, compact hybrid interconnect solution with retractable Digital (HDMI) and Analog (VGA) cables, along with snap-in ports for audio, network and USB connectors. Designed for mounting into tables, podiums, or other furniture as part of a presentation system. The TNP530 is a compact interconnect solution designed for mounting into tables, podiums, or other furniture as part of a presentation system. Inputs are accessed by pushing down on the top cover allowing TNP530 to “tilt” open. The inputs are hidden by pressing down on the top cover until the latching mechanism engages. In the closed position, the top cover lays almost flush with the tabletop. The TNP530 is a “hybrid package” that covers the needs of many users and includes the following connectivity: 2pc – U.S. power receptacles (12 Amps) 1pc – Digital video –HDMI retract (RT300-125) 1pc – Computer video
CNK200 Cable Retractors Installation
Cable retractors can be installed on several different tabletop units. This video shows how to install the retractors in CNK200 table top interconnect box. The AC200-125 is the mounting hardware for the RT300-xxx series of retractable cables (HDMI/VGA/USB/RJ-45) to be used inside CNK200 series units. The AC200-125 mounting hardware securely mounts the retractable cable housing using four screws. The AC200-125 metal bracket slides onto the CNK’s exterior hooks. The retractable housing with the AC200-125 bracket is secured to the CNK table-top with thumb screws and wing nuts provided in the accessories kit. The RT300-125 offers a solution for managing HDMI cables. The cable assembly was designed to deliver high definition video and audio to a switcher or a display. The HDMI cable contains a built-in amplifier to maintain HDMI signal integrity. The RT300-125 offers a solution for managing HDMI cables. The cable assembly was designed to deliver high definiti
Cable Nook Retractable Cable Installation
Cable retractors cane be installed on several different tabletop units. This video shows how to install the retractors in CNK200 table top interconnect box. The AC200-125 is the mounting hardware for the RT300-xxx series of retractable cables (HDMI/VGA/USB/RJ-45) to be used inside CNK200 series units. The AC200-125 mounting hardware securely mounts the retractable cable housing using four screws. The AC200-125 metal bracket slides onto the CNK’s exterior hooks. The retractable housing with the AC200-125 bracket is secured to the CNK table-top with thumb screws and wing nuts provided in the accessories kit. The RT300-125 offers a solution for managing HDMI cables. The cable assembly was designed to deliver high definition video and audio to a switcher or a display. The HDMI cable contains a built-in amplifier to maintain HDMI signal integrity. The RT300-125 offers a solution for managing HDMI cables. The cable assembly was designed to deliver hi